Cleaning Reloadable Motor Hardware

Here is how I clean the reloadable motor hardware.

1. Remove all the loose material

2. Inspect the parts

3. Do a little scrapping of the residue to see how much there is

4. Use two brass brushes to remove most residue. One brush is straight and one is a cylinder. Be sure the threads are clean.

5. Put the the parts in a paint thinner

6. Rub with a cloth

7. Do scrapping where needed

8. Try a little more paint thinner and rubbing

9. Wash with soap and water, and dry with a cloth

10. Apply a little WD40

I don't think you need to do all this, but they are very clean when I am done.